Reaksi transfer hidrogenasi minyak jarak kastor serta aplikasinya sebagai bahan pelunak kompon karet
Abstract
Rubber plasticizer is used to improve rubber processability so as to shorten time and reduce energy consumption during compounding. In general, rubber plasticizer is nonrenewable and environmentally harmful petroleum derivatives due to the carcinogenic property. Environmentally friendly plasticizer can be produced by transfer hydrogenation of vegetable oil. The research was aimed to synthesize new rubber plasticizer from transfer hydrogenation of castor oil using diimide compound which was generated in situ by oxidation of hydrazine hydrate and hydrogen peroxide as well as the application of the new rubber plasticizer obtained on natural and synthetic rubbers compounding. The result showed that the optimum condition of transfer hydrogenation was achieved at a capacity of 1000 ml oil/batch, 40oC for 5 hours, and ratio hydrazine hydrate to hydrogen peroxide at 1:2 due to the hydrogenated castor oil (HCO) had the highest degree of hydrogenation and neutral pH. The application of 10 phr HCO had significant effect on the compounding of EPDM 6250 which was shown by shortest time and lowest energy of compounding, and also by the highest minimum torque modulus. In addition, the crosslink density of rubber vulcanizate which was formed during accelerated sulfur vulcanization was affected both by the addition of HCO and the saturation of the rubber being used.
Keywords: environmentally friendly plasticizer, castor oil, diimide hydrogenation, rubber.
Full Text:
PDF
DOI: http://dx.doi.org/10.20543/mkkp.v32i2.1361
References
Alexander, M., & Thachil, E. T. (2006). A comparative study of cardanol and aromatic oil as plasticizers for carbon-black-filled natural rubber. Journal of Applied Polymer Science, 102, 4835-4841,
http://dx.doi.org/10.1002/app.24811
Ansarifar, A., Critchlow, G. W., Guo, R., Ellis, R. J., Kirtley, S. P., & Seymour, B. (2007). Effect of rubber chemicals on the surface free energy of NR and NR-SBR rubber blends. Journal Rubber Research, 10(3), 148-160.
Aprem, A. S., Joseph, K., Mathew, T., Altstaedt, V., & Thomas, S. (2003). Studies on accelerated sulphur vulcanization of natural rubber using 1-phenyl-2, 4-dithiobiuret/tertiary butyl benzothiazole sulphenamide. European Polymer Journal, 39, 1451-1460, http://dx.doi.org/10.1016/S0014-3057(02)00382-8
Arayapranee, W., & Rempel, G. L. (2007). Effects of cashew nut shell liquid as a plasticizer on cure characteristic, processability and mechanical properties of 50:50 NR/EPDM blends: A comparison with paraffin oil. Journal of Applied Polymer Science, 106, 1696-2702, http://dx.doi.org/10.1002/app.25936
Ariatmi, N. R., Djumali, M., Ani, S., Machfud, M., & Sudradjat, S. (2010). Optimasi proses dan kinetika reaksi epoksidasi minyak jarak pagar (Jatropa curcas L.) dengan hidrogen peroksida. Jurnal Teknologi Industri Pertanian, 18(2), 66-70.
Azhar, N. H. A., Jamaluddin, N., Rasid, H. M., Yusof, M. J. M., & Yusoff, S. F. M. (2015). Studies on hydrogenation of liquid natural rubber using diimide. International Journal of Polymer Science, 12, 1-6, http://dx.doi.org/10.1155/2015/243038
Cataldo, F., Ursini, O., & Angelini, G. (2013). Biodiesel as a plasticizer of a SBR-based tire tread formulation. ISRN Polymer Science, 1-9, http://dx.doi.org/10.1155/2013/340426
Chandrasekaran, V. C. (2010). Rubber as a construction material for corrosion protection: a comprehensive guide for process equipment. Canada: Scrivener Publishing LLC.
Chen L., Gong, X. L., Jiang, W. Q., Yao, J. J., Deng, H. X., & Li, W. H. (2007). Investigation on magnetorheological elastomers based on natural rubber. Journal of Materials Science., 42(14), 5483-5489, http://dx.doi.org/10.1007/s10853-006-0975-x
Formela, K., Wasowicz, D., Formela, M., Hejna, A., & Haponiuk, J. (2015). Curing characteristics, mechanical and thermal properties of reclaimed ground tire rubber cured with various vulcanizing systems. Iran Polymer Journal, 24, 289-297, http://dx.doi.org/10.1007/s13726-015-0320-9
Gonzales, H. L., Rodriguez, D. A., Valetin, J. L., Marcos-Fernandez, A., & Posadas, P. (2005). Conventional and efficient crosslinking of natural rubber effect of heterogeneities on the physical properties. Elastomer and Plastics, 58(12), 638-643.
Iqbal, M., Akhter, T., Farooqui, Z., & Mahmood, K. (2008). The effects of plasticizer and filler on the curing characteristic and mechanical properties of (SBR) styrene butadiene rubber and (CR) chloroprene rubber blends. Journal Chemical Society of Pakistan, 30(4), 507-511.
Karak, N. (2009). Fundamentals of polymers material to finish products. New Delhi, India: Learning Private Limited.
Khalaf, A. I., Ward, A. A., El-Kader, A. E, & El-Sabbagh, S. H. (2015). Effect of selected vegetable oils on the properties of acrylonitrile-butadiene rubber vulcanizates. Polimery, 60(1), 43-56, http://dx.doi.org/10.14314/polimery.2015.043
Khimi, S. R., & Pickering, K. L. (2014). A new method to predict optimum cure time of rubber compound using dynamic mechanical analysis. Journal of Applied Polymer Science, 131(6), 1-6, http://dx.doi.org/10.1002/app.40008
Kraft, V., Kretzschmar, G.,& Rossen, K. (2011). Process for the production of atermisinin intermediate, US Patent 0230669 A1 tanggal publikasi 22 September 2011, United States.
Lanxess. (2007). Buna EP ethylene propylene rubber the versatile elastomer. Germany: Lanxess.
Lin, X., Pan, Q., & Rempel, G.L. (2004). Cupric ion catalyzed diimide production from the reaction between hydrazine and hidrogen peroxide, Journal of Applied. Catalysis A : General , 263(1), 27-32, Http://dx.doi.org/10.1016/j.apcata.2003.11.035
Lin, X. (2005). Hydrogenation of unsaturated polymers in latex form (Thesis), University of Waterloo, Ontario, Canada.
Liu, K. S. (2009). Effects of particle size distribution, compositional and color properties of ground corn on quality of distillers dried grains with solubles (DDGS). Bioresource Technology, 100(19), 4433-4440. http://dx.doi.org/10.1016/j.biortech.2009.02.067
Mahittikul, A., Prasassarakich, P., & Rempel, G. L. (2007). Diimide hydrogenation of natural rubber latex. Journal of Applied Polymer Science, 105(3), 1188-1199, http://dx.doi.org/10.1002/app.25944
Marin, M. J. G., Garcia, F. P., & Santillan, Y. M. (2012). Obtaining and characterization of biodiesel from castor oil (ricinus communis) and sunflower (helianthus annuus) grown in Tabasco, Mexico. International Journal of Applied Science and Technology, 2(9), 58-74.
Martin, J. G., Ernst, J. L., Jankowski, C. J., & Scheteliclr, A. A. (1962). US Patent No. 3023195 A, Washington, USA: U.S. Patent and Trademark Office.
McKeen, L. W. (2012). Film properties of plastics and elastomers. (3rd ed.). USA: Elsevier Inc.
Oh, J., Yoo, Y. H., Yoo, I. S., Huh, Y.I., Chaki, T. K., & Nah, C (2014). Effect of plasticizer and curing system on freezing resistance of rubbers. Journal of Applied Polymer Science, 131, 1-8, http://dx.doi.org/10.1002/app.39795
Petchkaew, A. (2015). Implication of non carcinogenic PAH-extender oils in natural rubber based tire compounds (Thesis), University of Twente and Prince of Songkla University, Netherland and Thailand.
Puspitasari, S., & Cifriadi, A. (2012). Kajian pembuatan bahan pelunak karet berbasis hayati dari minyak jarak melalui reaksi hidrogenasi.Warta Perkaretan, 31(1), 50-56.
Puspitasari, S., & Cifriadi, A. (2014a). Karakterisasi minyak jarak terhidrogenasi sebagai bahan pelunak karet alami. Jurnal Penelitian Karet, 32(1), 65-73.
Puspitasari, S., & Cifriadi, A. (2014b). Pembuatan bahan pelunak alami untuk kompon karet melalui reaksi hidrogenasi minyak jarak castor. Jurnal Penelitian Karet, 32(1), 56-64.
Rahmaniar, R., Gatot, P., & Basuni, H. (2009). Pembuatan kompon karet dengan penambahan minyak kemiri (candlenut oil) epoksi. Dinamika Penelitian BIPA, 20(35), 59-68.
Rao, R. R., & Prasad, K. R. (2004). Effects of velocity slip and viscosity variation on journal bearings. The ANZIAM Journal, 46(1), 143-155, http://dx.doi.org/10.1017/S1446181100013730
Raju, P., Nandanan, V., & Kutty Sunil, K. N. (2007). A study on the use of coconut oil as plasticiser in natural rubber compounds. Journal Rubber Research, 10(1), 1-16.
Restrepo-Zapata, N. C., Osswald, T. A., & Hernandez-Ortiz, J. P. (2014). Vulcanization of EPDM rubber compounds with and without blowing agents: Identification of reaction events and TTT-diagram using DSC data. Polymer Engineering and Science, 55(9), 2073-2088, http://dx.doi.org/10.1002/pen.24049
Rodgers, B. (2015). Rubber compounding: chemistry and applications, second edition. Florida, USA: CRC Press.
Samarth, N. B., & Mahanwar, P. A. (2015). Modified vegetable oil based additives as future polymeric material – review. Open Journal of Organic Polymer Materials, 5, 1-22, http://dx.doi.org/10.4236/ojopm.2015.51001
Smit, C., Fraaije, M. W., & Minnaard, A. J. (2008). Reduction of carbon-carbon double bonds using organocatalytically generated diimide. Journal of Organic Chemistry, 73(23), 9482-9485, http://dx.doi.org/10.1021/jo801588d
Vieira M. G. A., da Silva, M. A., dos Santos, L.O., & Beppu, M.M. (2011). Natural-based plasticizers and biopolymer films: A review. European Polymer Journal, 47(13), 254-263, http://dx.doi.org/10.1016/j.eurpolymj.2010.12.011
Wang, Z., Peng, Y., Zhang, L., Zhao, Y., Vyzhimov, R., Tan, T., & Fong, H. (2016). Investigation of palm oil as green plasticizer on the processing and mechanical properties of ethylene propylene diene monomer rubber. Industrial & Engineering Chemistry Research, 55(10), 2784-2789, http://dx.doi.org/10.1021/acs.iecr.5b04527
Yousef, E. A. A., Hussain, A. E., & Shoeb, Z. E. (2001). Modification of castor oil by isomerization, halogenation and application of some modified product as plasticizer in nitril rubber formulation. Journal of Scientific and Industrial Research, 60, 383-395.
Zhao, J., Ghebremeskel, G., & Peasely, J. (2001). Properties of EPDM/SBR blends cured with peroxide and sulfur coagent. Elastomer and Plastics, 54, 223-228.
No comments:
Post a Comment